The hose joint is a key component used to connect the hoses, which can ensure the connection between the hoses is firm and reliable. When using hoses for liquid or gas transmission, the correct connection method is crucial to ensure the normal operation and safety of the entire system. The following will introduce the specific procedures of the hose connection.

1. Preparation: Select suitable hoses and joints, and ensure their size and material match. Clean hoses and joint surfaces of dirt and impurities to ensure the quality of the connection.

2. Threaded connection operation: Align the threaded part of the hose with the threaded part of the joint and turn the hose counterclockwise until the connection is secured. Tighten properly with a wrench to ensure the stability of the connection, but avoid damage caused by excessive tightening.

3. Clamp connection operation: The clamp is sleeved at the connection between the hose and the joint to ensure that the hose and the joint are fully embedded in the clamp. Put them into the crimping machine and apply appropriate pressure to ensure a tight connection.

4. Welding connection operation: Surface treatment of the connection between the hose and the joint to remove oxides and dirt. According to the requirements of welding materials, carry out welding operations to ensure that the welding area is evenly heated. Check after welding to ensure that there are no cracks and bubbles in the weld.